SmallRig Half Cage for Sony A7 III A7R III A7R IV CCS2629
客戶也查看了
Key Features:
1. Form-fitting camera half cage
2. Secure the camera with two attachment points
3. Multiple 1/4"-20 & 3/8"-16 threaded holes
4. Built-in NATO rail, ARRI locating holes and cold shoe
5. Built-in screwdriver on the bottom
SmallRig Half Cage for Sony A7 III A7R III A7R IV CCS2629 mounts to the camera using a 1/4”-20 screw on the bottom and s second M2.5 lock on the side, with rubber pads on the base plate preventing scratches. It comes with a variety of mounting options including 1/4’’-20 and 3/8’’-16 holes, ARRI locating holes, built-in NATO rail and cold shoe, which makes it easy to mount different camera accessories. Attach SmallRig Handle 1984, 2165 or 2187 for hand-held shooting; use SmallRig Ballhead Arm 2070 to firmly fix your monitor. The cage is compatible with SmallRig Cable Clamp 1679 to protect the HDMI cable and port. An included screwdriver is designed to tighten or detach the screws both at the bottom and side. The cage maintains full access to camera’s controls, ports and comfortable grip.
Designer: Tracy Joy
NOTE:
Installation Steps:
1. Please remove the camera’s strap triangel on the left first and keep it well;
2. Put the camera into the cage and tighten the 1/4”-20 screw on the bottom;
3. Make sure the cage’s side lock is aliged with the strap hole, tighten the M2.5 screw on the strap hole first and then tighten the other M2.5 screw on the cage.
Compatibility:
Sony A7 III/A7R III/A7R IV
Package Includes:
1 x Cage
Product Dimensions: 106.5 x 94x 64mm
Package Dimensions: 160 x 120 x 68mm
Net Weight: 185g
Package Weight: 252g
Material(s): Aluminum Alloy
保養期以購買單據日期為準。保養不包括人為/意外損壞及耗損品(如燈泡、閃光燈燈管、LED等)。
如需維修,請先透過 WhatsApp 聯絡我們,告知產品問題並提供單據。我們將評估後通知您應自行帶到代理維修點,還是帶到我們門市處理。
如於購買後7天內發現產品品質不符出廠標準,請連同原廠包裝、說明書、未填寫之保用證及發票帶回門市更換同款產品。超過7天則只能進行一般維修服務。所有消耗品(如濾鏡、清潔劑、燈泡等)不設退換服務。本公司不提供上門檢查、維修或更換服務,所有貨品亦不得退回現金。瑩記保留最終保修及退換決定權。